Three-rail threading Turnout left R = 1200 mm, scale II G, exit scale G

Three-axis threading cross-section of the scale 2 (64mm) into the scale G (45mm), left, R3 (LGB) = 1200mm.
Now with 5 screw rail connectors 19mm from Massoth
Base is an LGB soft no. 16150, 22 ° which has got a third rail in the abs of 64mm in the straight area.
Likewise, you can also use a Trainline45 switch for the conversion.
The fitting may be e.g. An LGB link switch with 22.5 °.
Straight track 440mm.
The turnout drive can only be installed in the arc area.
It is a handmade model.
The fitting may be e.g. An LGB link switch with 22.5 °.
Straight track 440mm.
The turnout drive can only be installed in the arc area.
The LGB switch is used.
Alternatively, a new Trainline45 Soft R = 1200mm is used for new points
It is a handmade model.
Please do not expect any perfect-looking sleepers, as sleepers for the 3rd track are glued. It allows, for example, an outer scale II Gleisoval to grow a scale G oval, whereby scale G trains can drive both the three-track tracks of scale II Also the scale G tracks.
The scale II (64mm) trains, on the other hand, must remain on your tracks.
It must be noted that the turnout for track II vehicles must be straight, as otherwise the derailment will occur.
The scale G train can turn straight or turn.
The switch is equipped with an electric LGB turnout drive.
Further program.
Same soft, but as crossover with the number ZRL-16050-3
To our knowledge, we are the only ones to build such a special turnout.
It has many advantages.
Among other things, it makes it possible to open up the world of scale II to the scale G garden railroads and to reach the 45 / 64mm rollerblade pits or 45 / 64mm wheeled trolleys.
In the right photo you see a thread.
A scale G train can not go straight ahead.